|
 |
LASTEK 36 DF
HOT APPLIED JOINT AND CRACK SEALER |
|
No bleed- through– the preferred material for use prior to sealcoating because it will not bleed through
No tracking– does not require sanding in most conditions
Fast melt time— saves time and energy— can be reheated
Superior resilience and adhesion |
|
LASTEK 36 DF Crack Sealer is a high quality, single component, hot applied joint and crack sealant.
Supplied as a solid, it is self-leveling at application temperatures. Composed of select oils,
resins, polymers, plasticizers, stabilizers, and asphalt cement, it forms a resilient and adhesive
compound that will seal joints and cracks against the infiltrations of moisture. Will not flow from
the joint or crack at ambient temperatures.
THE QUICK FIX FOR THE LONG HAUL IN ASPHALT OR CONCRETE PAVEMENTS
CAN BE USED IN A DIRECT BOTTOM FIRED MELTER, OR A DOUBLE BOILER TYPE MELTER.
Weight Per Gallon: 9.4 lbs.
Application: Apply to clean dry cracks when ambient and pavement
temperatures are above freezing. Joints and cracks should be filled full
and tight squeegeeing may be desirable.
Coverage: 1/2" x 1/2" Cracks — 13 lbs. Per 100 linear feet
Application Temperatures: Recommended pouring temperature 350 degrees F.
Safe heating temperature 400 degrees F.
|