Description:
REC-TECH Acrylic Resurfacer, applied to asphalt or concrete surfaces, fills surface voids and imperfections and helps provide a smooth, well prepared surface. This 100% acrylic emulsion is designed for onsite mixing with silica sand and water.

Available Colors:

Black	Neutral

*These colors may vary from actual product colors due to screen variations.

Available Sizes: 5 Gallon Pail, 30 Gallon Keg, 55 Gallon Drum

Directions:
Allow newly applied asphalt or concrete to cure for at least one month prior to applying REC-TECH Acrylic Resurfacer.

Pavement surface should be cleaned completely of dirt, loose stone, and vegetation before application. Stir material before use. Mix Rec-Tech Acrylic Resurfacer according to directions and apply with a rubber squeegee. Before applying additional coats, scrape all rough spots and ridges.

Mixing Directions:
Acrylic Resurfacer - 55 Gallons
Water - 33 Gallons
Silica Sand - 800 Lbs. (50-70 Mesh)
* Acrylic Resurfacer can be used for filling depressions and patching by adding more sand and less water (use a coarse, angular sand for patching mixes).

Note:
Temperature must be at least 50ºF and rising during application and for at least 24 hours after application. Do not apply if rain is imminent or forecast for the next 24 hours.

Coverage:
Coverage is approximately .07 to .09 gallons per square yard, per coat. Coverage is based on undiluted gallons of Acrylic Resurfacer and will vary according to the porosity and texture of the surface.